// ------------------------------------------------------------------------
// Main Window
// ------------------------------------------------------------------------
"Fax Settings"="傳真設定";
"Back"="背面";
"Str_Fax_Settings_Btn_Next"="下一步";
"Str_Fax_Settings_Btn_Finish"="完成";

// ------------------------------------------------------------------------
// Introduction
// ------------------------------------------------------------------------
"Str_Introduction_View_Title"="簡介";
"Make the basic settings to send/receive faxes."="進行傳送/接收傳真的基本設定。";
"Make sure that the computer is connected to the printer, the printer driver is installed, setup for printing from the computer is finished, and the printer is turned on."="請確定電腦已連接至印表機、已安裝印表機驅動程式、已完成從電腦列印的設定，並且已開啟印表機電源。";

// ------------------------------------------------------------------------
// Progress Message(read setting information)
// ------------------------------------------------------------------------
"Str_Read_Information_Progress_Message"="讀取印表機的設定資訊。";

// ------------------------------------------------------------------------
// Header Information Settings
// ------------------------------------------------------------------------
"Str_Header_Information_Strings_View_Title"="標題資訊設定";
"Enter your Fax Header and Phone Number."="輸入傳真標題及電話號碼。";
"Fax Header:"="傳真標題:";
"Your Phone Number:"="電話號碼:";
"Your Fax Header and Phone Number are displayed at the top of the received fax."="目的地接收傳真時，您的傳真標題及電話號碼會顯示在傳真頁的頂端。";

// ------------------------------------------------------------------------
// Auto Answer Settings
// ------------------------------------------------------------------------
"Str_Auto_Answer_Strings_View_Title"="自動應答設定";
"If you use the Fax more than the Printer, we recommend using Auto Answer. We also recommend keeping paper for fax reception loaded at all times."="如果您使用傳真的次數多於印表機，建議使用〝自動應答〞。另外，建議隨時放入紙張供傳真接收使用。\n附註：\n依地區而定，印表機可能無法設定應答鈴聲。";
"Number of Rings to Answer:"="應答鈴聲次數:";
"Make sure you set Auto Answer if there is no external telephone connected to the printer.\nFaxes cannot be received if Auto Answer is not set."="如果印表機沒有任何外接電話，請確定已設定為自動應答。\n如果未設定為自動應答，則無法接收傳真。";
"Auto Answer"="自動應答設定";
"Str_Auto_Answer_Strings_Button_On"="自動應答設定:開啟";
"Str_Auto_Answer_Strings_Button_Off"="自動應答設定:關閉";
"Str_Auto_Answer_Strings_Button_AutoSwitch"="傳真/電話自動切換";

// ------------------------------------------------------------------------
// Dial Tone Detection Settings
// ------------------------------------------------------------------------
"Str_Dial_Tone_Detection_Settings_View_Title"="撥號音偵測設定";
"Set whether or not to start dialing after detecting a dial tone."="設定是否在偵測到撥號音時開始撥號。";
"If a dial tone cannot be detected by the Check Fax Connection, you can dial by clearing the check box."="如果檢查傳真連線無法偵測到撥號音，請取消勾選檢查盒。";
"Sometimes, clearing the check box might remove part of the number, and you might connect to the wrong number."="取消勾選檢查盒有時可能會移除部份號碼，而撥打到錯誤的號碼。";
"Detect Dial Tone"="偵測撥號音";

// ------------------------------------------------------------------------
// Confirm Settings
// ------------------------------------------------------------------------
"Str_Confirm_Settings_View_Title"="正在檢查設定";
"Check the following settings."="請檢查下列設定。";
"Click [Next] to send the setting information to the printer."="按 [下一步] 將設定資訊傳送至印表機。";
"Str_Confirm_Settings_View_SText_Fax_Header"="傳真標題:";
"Str_Confirm_Settings_View_SText_Phone_Number"="電話號碼:";
"Str_Confirm_Settings_View_SText_Auto_Answer"="自動應答設定:";
"Str_Confirm_Settings_View_SText_Rings_To_Answer"="應答鈴聲：";
"Str_Confirm_Settings_View_SText_Dial_Tone_Detection"="撥號音偵測:";
"Str_Confirm_Settings_View_SText_On"="開啟";
"Str_Confirm_Settings_View_SText_Off"="關閉";
"Str_Confirm_Settings_View_SText_AutoSwitch"="自動切換";

// ------------------------------------------------------------------------
// Progress Message(write settings information)
// ------------------------------------------------------------------------
"Str_Write_Information_Progress_Message"="正在傳送設定至印表機。";

// ------------------------------------------------------------------------
// Settings Complete
// ------------------------------------------------------------------------
"Str_Settings_Complete_View_Title"="設定完成";
"Str_Settings_Complete_View_SText_Success"="傳真設定已完成。";

// ------------------------------------------------------------------------
// Failed to make Fax Settings
// ------------------------------------------------------------------------
"Str_Failed_Make_Fax_Settings_View_Title"="無法進行傳真設定";

// ------------------------------------------------------------------------
// Menu
// ------------------------------------------------------------------------
"FAX Utility"="FAX Utility";
"About FAX Utility..."="關於FAX Utility...";
"Preferences..."="偏好設定...";
"Services"="服務";
"Hide FAX Utility"="隱藏FAX Utility";
"Hide Others"="隱藏其他";
"Show All"="顯示全部";
"Quit FAX Utility"="結束FAX Utility";
"File"="檔案";
"Close"="關閉";
"Edit"="編輯";
"Undo"="復原";
"Redo"="重複";
"Cut"="剪下";
"Copy"="複製";
"Paste"="貼上";
"Delete"="刪除";
"Select All"="全選";
"Window"="視窗";
"Minimize"="縮到最小";
"Help"="說明";

// ------------------------------------------------------------------------
// Alert(Common)
// ------------------------------------------------------------------------
"Str_Alert_Common_Cancel"="取消";
"Str_Alert_Common_OK"="好";

"Str_Alert_Common_Necessary_File_Not_Found"="找不到執行應用程式所需的檔案。\n請重新安裝 FAX Utility。";
"Str_Alert_Common_Cannot_Get_Printer_Information"="無法取得印表機 (傳真) 資訊。請開啟〝列印及傳真偏好設定〞，然後新增電腦傳真驅動程式。";
"Str_Alert_Common_Confirm_OverWrite"="指定的檔案已存在。是否要覆寫？";
"Str_Alert_Common_Not_Responding_Error"="印表機沒有回應。確定有正確地連接印表機，並且已開啟電源。";
"Str_Alert_Common_Communication_Error"="發生印表機連線錯誤。";
"Str_Alert_Common_Printer_Processing_Error"="印表機正在處理資料。請稍後重試一次。";
"Str_Alert_Common_Communication_Error_With_ErrorCode"="連接至印表機時出現錯誤。\n錯誤代碼 (%d)";
"Str_Alert_Common_Error_Occurred"="由於發生錯誤，因此取消處理。";
"Str_Alert_Common_PrinterStatusError"="印表機發生錯誤。請清除錯誤，然後重試一次。";

// ------------------------------------------------------------------------
// Alert(FAX Settings)
// ------------------------------------------------------------------------
"Str_Alert_Fax_Settings_Cannot_Open"="無法啟動傳真設定，因為其他 FAX Utility 功能已經在執行中。請等候執行完畢，然後再試一次。";
"Str_Alert_Fax_Settings_Confirm_Cancel_Processing"="傳真設定未完成。\n是否要取消處理?";
"Str_Alert_Fax_Settings_Input_FaxHeader_Not_Support"="傳真標題只可使用英文字母、數字及符號。";
"Str_Alert_Fax_Settings_Input_PhoneNumber_Not_Support"="電話號碼只可使用數字和空格。";
"Str_Alert_Fax_Settings_Input_RetryCount_Not_Support"="將應答鈴聲次數設定在 %d 至 %d 的範圍內。";
"Str_Alert_Fax_Settings_Setting_Information_Failed"="從印表機取得的設定資訊中發現問題。\n項目名稱：(%@)";